Somat eDAQlite, Руководство пользователя

Страница: 77 / 228

I2773-4.
4
en 77
Somat eDAQ
lite
4.5.4 Scope Plot
The scope plot display is similar to that of an analog oscilloscope except that the
display is not updated until the eDAQ
lite
acquires all of the data samples and
transfers them to TCE which creates a delay in the data presentation. The scope plot
is available for a single channel at pre-initialization, as a prerun option and as a
run-time display. For more information on scope plot display preferences, see
“Scope
and Spectrum Display” on page 56 .
Figure 4-4: A TCE scope plot as a run-time display.
Samples
Select the desired number of samples to display on each scope scan.
Auto Scale
Select the auto scale option to switch to automatic y-axis scaling mode which sets the
y-axis limits to the maximum and minimum values in the data set for each scope scan.
Grid Lines
Select the grid lines option to add grid lines to the scope display. The grid lines divide
each axis into ten equal parts. If using the auto scale option, TCE only displays the
x-axis grid lines.
HBM: public