Somat eDAQlite, Руководство пользователя

Страница: 180 / 228

Somat eDAQ
lite
180 I2773-4.
4
en
Click the Update eDAQ hardware list button to reset the eDAQ
lite
and update the
hardware list on the hardware tab to include the selected cameras shown in the table.
Click the Cancel Changes button to clear the selected network cameras table without
adding any cameras to the hardware list.
Available Networked Cameras
The available networked cameras shows the cameras on the network. A new or
unconfigured camera is identified as a Misconfigured Camera. An entry for a
misconfigured camera lists the camera serial number and IP address. Click the
Correct camera configuration link in the entry to start the camera configuration
process. Click the Remove link in the entry to remove the camera from the available
networked cameras list.
An entry for a configured camera lists the camera name, firmware version, serial
number and IP address. Click the Select this camera link in the entry to add it to the
selected network cameras table. Click the Remove link in the entry to remove the
camera from the available networked cameras list.
Click the Find Cameras on Network button to search for cameras on the network and
add them to the list of available cameras. To add a camera at a specific IP address,
enter the IP address and select Add Camera.
Configure Networked Camera
To configure a specific camera on the network, enter the camera serial number and
select Configure Camera. This is useful if the Find Cameras on Network function in the
previous section cannot find the camera on the network.
9.3.3 Select Storage Device
Use the pick list to select internal Flash or DRAM and click Change Storage Device to
change the storage media used for test data storage. For more information on
eDAQ
lite data storage, see “Data Storage Options” on page 38 .
9.4 Channels Tab
The Channels tab provides information about the defined transducer, message and
computed channels in the most recently initialized test. The information displayed for
the transducer and message channels includes the unique ID, the connector, the
transducer type, the sample rate, the calibration date and other information pertinent
to the channel. The information displayed for computed channels includes the network
node associated with the channel, the unique ID, the prefix, a description and other
information pertinent to the channel.
9.5 Test Tab
The test tab provides information about the current test including the name of the
setup file, the current or next run number and the elapsed run time. Refresh the page
to update the test information.
Test Status
View a summary of test and eDAQ lite information including test run status, RAM disk
files, RAM disk memory and PC Card memory.
HBM: public