Somat eDAQlite, Руководство пользователя

Страница: 179 / 228

I2773-4.
4
en 179
Somat eDAQ
lite
Code
The code column displays the version of the code (i.e., firmware) that controls the
layer. To update the code from the web interface, click the hyperlink. For layers that
place more than one entry in the hardware list, only one of the entries allows an update
to the firmware. For more information on updating firmware, see
“Updating Firmware”
on page 27 .
CAUTION
Failures during a critical point in any upgrade/reflash can cause the hardware to
malfunction, requiring its return to HBM for repair by a qualified HBM technician.
Hardware Specifics
The hardware specifics column includes other pertinent details about the layer such
as applicable ECNs, the selected storage media or GPS model.
An ECN is an engineering change notice signifying a physical modification made to
the hardware of a layer to correct or improve its performance. These changes are
recorded in non-volatile memory within the layer. Click the link to view the ECN number
and the date of the change.
Use the storage link in the MPB row to view details or reformat the PC Card media.
9.3.2 Manage Network Cameras
Click the Manage Network Cameras link to open the camera setup page.
Figure 9-4: Camera setup page of the eDAQ
lite
web interface.
Selected Network Cameras
The selected network cameras table shows the cameras selected to add to the
eDAQ
lite hardware list. The table shows each camera’s IP address, connector, serial
number and firmware code. The operations column shows a screen shot from the
camera, the name of the camera and a Deselect link. Click Deselect to remove the
camera from the table.
HBM: public