Solmetric PVA-600 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 91

background image

iv

Confidentiality

The PC Software and Embedded Software contains trade
secrets and proprietary know-how that belong to us and it is
being made available to you in strict confidence. ANY USE
OR DISCLOSURE OF THE PC SOFTWARE,
EMBEDDED SOFTWARE, OR OF THEIR
ALGORITHMS, PROTOCOLS OR INTERFACES,
OTHER THAN IN STRICT ACCORDANCE WITH THIS
LICENSE AGREEMENT, MAY BE ACTIONABLE AS
A VIOLATION OF OUR TRADE SECRET RIGHTS.

Trademarks

SOLMETRIC, PV ANALYZER, PV DESIGER,
SOLMERIC IPV and SOLMETRIC ISV are trademarks
owned by Solmetric Corporation. SOLMETRIC and
SUNEYE are registered trademarks in the U.S. Patent and
Trademark Office.

General Provisions

1.

This written agreement is the exclusive agreement
between you and us concerning the PC Software,
Embedded Software, Hardware, and Documentation
and supersedes any and all prior oral or written
agreements, negotiations or other dealings between us
concerning the PC Software, Embedded Software,
Hardware or Documentation.

2.

This license agreement may be modified only in
writing and written documentation must be signed by
Buyer and Solmetric.

3.

In the event of litigation between Buyer and Solmetric
concerning the PC Software, Embedded Software,
Hardware, or Documentation, the prevailing party in
the litigation will be entitled to recover attorney fees
and expenses from the other party.

4.

This license agreement is governed by the laws of the
State of California.

5.

Buyer agrees that the PC Software, Embedded
Software, or Hardware will not be shipped, transferred
or exported into any country or used in any manner
prohibited by the United States Export Administration
Act or any other export laws, restrictions or
regulations.

«
...
2
3
4
5
6
...
»

Содержание PVA-600




























































































Отзывы:

Нет отзывов

Похожие инструкции для PVA-600

Бренд: Bacharach Страницы: 19

Бренд: 3B6 Страницы: 30

Бренд: ACECO Страницы: 2

Бренд: Bante Instruments Страницы: 6

Бренд: Rayjet Страницы: 81

Бренд: jenway Страницы: 52

Бренд: Midcontinent Страницы: 6

Бренд: CA.MI Страницы: 68

Бренд: Hanna Instruments Страницы: 2

Бренд: Zero 88 Страницы: 32

Бренд: Eurotron Страницы: 122

Бренд: Hanna Instruments Страницы: 28

Бренд: Ratek Страницы: 24

Бренд: Amptec Research Страницы: 19

Бренд: Kinesys Страницы: 10

Бренд: REED Страницы: 20

Бренд: Geokon Страницы: 19

Бренд: Vaisala Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды