manualshive.com logo in svg

SolarMax 10ES-T, Инструкция по эксплуатации

Поделиться
Скачать
SolarMax 10ES-T Скачать руководство пользователя страница 82

82

ALARM

TYPE

SOLUTION

E008

Internal current 

leakage

 

■

Switch off and restart the system.

 

■

Refer to the sections “System switching off” and “System 

switching on”

 

■

Should the problem persist, contact our technical support 

service.

E009

NEUTRAL line wrongly 

connected

 

■

Check that the connections of the AC input and output lines 

respect the assigned polarity.

 

■

If the problem persists, contact the technical support 

service.

E010

Failed AUTOTEST 

(relevant only for CEI 

0-21)

 

■

Check the integrity of the electrical connections.

 

■

Make sure that the mains voltage and frequency are within 

the range allowed by the CEI 0-21 standard.

 

■

If the problem persists, contact the technical support 

service.

E011

High grid voltage

 

■

Make sure that the mains voltage is within the range allowed 

by local regulations.

 

■

Check the network impedance.

 

■

If the mains voltage is not within the permitted range for 

reasons due to the local grid conditions, contact the grid 

operator to evaluate the possibility of adapting the voltages 

at the connection point or request approval for the change to 

the operating limits.

 

■

If the mains voltage is within the allowed range, but the 

alarm persists, contact the technical support service.

E012

High grid voltage

 

■

Make sure that the mains voltage is within the range allowed 

by local regulations.

 

■

Check the network impedance.

 

■

If the mains voltage is not within the permitted range for 

reasons due to the local grid conditions, contact the grid 

operator to evaluate the possibility of adapting the voltages 

at the connection point or request approval for the change to 

the operating limits.

 

■

If the mains voltage is within the allowed range, but the 

alarm persists, contact the technical support service.

E013

Low grid voltage

 

■

Make sure that the mains voltage is within the range allowed 

by local regulations.

 

■

Check the network impedance.

 

■

If the mains voltage is not within the permitted range for 

reasons due to the local grid conditions, contact the grid 

operator to evaluate the possibility of adapting the voltages 

at the connection point or request approval for the change to 

the operating limits.

 

■

If the mains voltage is within the allowed range, but the 

alarm persists, contact the technical support service.

Содержание 10ES-T

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды