manualshive.com logo in svg

SolarMax 10ES-T, Инструкция по эксплуатации

Поделиться
Скачать
SolarMax 10ES-T Скачать руководство пользователя страница 6

6

2  Safety

2�1 

Intended use

SolarMax ES-T series inverters are designed exclusively for the conversion of the direct cur-
rent generated by PV modules into alternating current which conforms to the parameters of 
the public grid. Any other use is contrary to the intended use.

The ES-T is a DC-AC solar inverter, designed for use in indoor environments. It has been desi-
gned to be used in combination with PV panels and connected to the electricity grid and a 
high voltage (HV) storage battery to optimize selfconsumption. In the event of a temporary or 
permanent power outage, the ES-T automatically enables the off-grid operation on the EPS port 
supplying, with the backup energy, the part of the home system connected to it.

2�2 

Safety instructions

DANGER!
Fatal electric shock hazard!

In daylight the PV generator supplies the inverter with a dangerously high DC 
voltage.

 

■

Make sure that all electrical input conductors to the inverter are de-energized 
before starting any work on the inverter or the input conductors.

DANGER!
Fatal electric shock hazard!

Components within the inverter are charged with a high voltage.

 

■

Never open the inverter while it is in operation. 

WARNING!
Risk of injury from electric arc!

Removing the DC connectors when live can lead to dangerous electric arcs.

 

■

Switch off the DC disconnector at the inverter before removing the DC 
connectors.

WARNING!
Fire hazard caused by inappropriate repair attempts!

 

■

The inverter does not contain any replaceable components. Defective inverters 
must be returned to the SolarMax Service Center for repair or disposed of in 
accordance with the instructions in this manual.

CAUTION!
The inverter can become very hot during operation�

 

■

Do not touch the heatsink and the side surfaces during or soon after the use.

Содержание 10ES-T

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды