SOLARFOCUS vampair K 08, Руководство по установке

Страница: 26 / 40

7 Electrical connection
7.5 Connect control eco
manager- touch
Mount the boiler control (display with metal surface-
mounted housing) and the electronic module on the
wall inside the building (e.g. in the equipment room).
7.5.1 Overview
Interfaces on the display
7.5.2 Surface-mounted installation
► It is possible to install the metal housing with 4
boreholes
1 .
► Installation on electrical flush-mounted socket is
possible with boreholes
2 .
(screw materials for installation of housing not inclu-
ded in scope of delivery).
►
Install the power supply in the housing.
7.5.3 Display power supply
►
Run the power supply for the display from the
power supply unit (supplied).
Display X1 Power supply unit
+ 24 V DC Pin 1 or 2 +
GND Pin 3 or 4 -
7.5.4 Connect CAN bus
► Make bus cable connection from the display to the
electronic module D1.
Display
X4
Electronic module
CAN-IN
CAN A Pin 1 or 3 A
CAN B Pin 2 or 4 B
GND Pin 5
GND
⏊
26 Installation manual vampair