SOLARFOCUS vampair K 08, Руководство по установке

Страница: 19 / 40

6 Hydraulic connection
Installation example: vamp
air
with electric heating ele-
ment and bottom connection set
Fig. 2-31
Rear connection set
– For connection of the heating circuit lines intro-
duced from the rear
–
Item no. 25107
Vent valve 1
Fig. 2-32
Fig. 2-33: Components of rear connection set
Seal insulation
► Stick fabric tape on insulation parts at the collision
point
6.5.2 Attach flow sensor
If the optional electric immersion heater is not used,
attach the
T1 flow sensor to the heating circuit connec-
tion set.
►
Secure the sensor 1 to the brass connection
bracket 2 with fabric tape.
► Install insulation and connect with fabric tape at
impact.
Fig. 2-34_002-iAM - Flow sensor
Installation manual vampair 19