SOLARFOCUS vampair K 08, Руководство по установке

Страница: 14 / 40

5 Install electric heating element (optional)
Remove cladding
► Loosen the 6 bolts (TX25 ) 1 , remove cladding 2 .
Fig. 2-17_005AT
4.8 Remove transport lock
i
Only required for K 12 and K 15
► Loosen 4 pcs. screws 1 and permanently remove
transport lock 2 .
Fig. 2-18_007cCM
5 Install electric heating element
(optional)
!
CAUTION - Protect the electrical clamping
area of ​​the heat pump against moisture (e.g.
precipitation) during connection work.
The electric heating element 1 , which is available as
an optional accessory, is connected to the heating cir-
cuit flow of the condenser (heat exchanger).
A mounting bracket is enclosed with the heating
element
2 . A contractor 5 und overtemperature reset 6
including sensor 4 are already preinstalled in the heat
pump.
The OTR protects the heating element from
overheating (by interrupting the power supply, e.g.
during dry running).
[1] The heating element is only for the three-phase version of the
vamp
air
, i.e. K 08.3, K 10.3, ...
Overview: Heating element and components
Fig. 2-19_012BE
1 Electric heating element
2 Bracket
3 Flow sensor (T1)
14 Installation manual vampair