manualshive.com logo in svg

Solarflare SFA6902F, Руководство пользователя, Страница: 69 / 375

Поделиться
Скачать
Solarflare SFA6902F Скачать руководство пользователя страница 69

Issue 11

© Solarflare Communications 2014

64

Solarflare Server Adapter

User Guide

target-username=<username>

Specifies the username that has been configured on 
the iSCSI target (maximum 64 characters).

Note that this option is necessary if Mutual CHAP is 
enabled on the adapter (

mutual-chap=enabled

).

Note that if there are spaces contained in 
<

username

>, then it must be wrapped in double 

quotes (“”).

target-secret=<secret>

Specifies the secret that has been configured on the 
iSCSi target (minimum 12 characters; maximum 20 
characters). 

Note: This option is necessary if Mutual CHAP is 
enabled on the adapter (

mutual-chap=enabled

).

Note that if there are spaces contained in <

secret

>, 

then it must be wrapped in double quotes (“”).

mpio-priority=<MPIO 

priority>

Specifies the Multipath I/O (MPIO) priority for the 
adapter. This option is only valid for iSCSI booting 
over multi-port adapters, where it can be used to 
establish adapter port priority. The range is 1- 255, 
with 1 being the highest priority.

mpio-attempts=<attempt 

count>

Specifies the number of times MPIO will try and use 
each port in turn to login to the iSCSI target before 
failing. 

msix-limit=

<8|16|32|64|128|256|512|1024>

Specifies the maximum number of MSI-X interrupts 
the specified adapter will use. The default is 32.

Note: Using the incorrect setting can impact the 
performance of the adapter. Contact Solarflare 
technical support before changing this setting.

pfiov=<enabled|disabled>

Enable PF-IOV support. This allows switching of 
traffic between any PFs. When disabled traffic is 
switched only between a PF and related VFs.

pf-count=<pf count>

This is the number of available PCIe PFs per physical 
network port. This setting is applied to all ports on 
the adapter. MAC address assignments may change 
after altering this setting. 

sriov=<enabled|disabled>

Enable SR-IOV support for operating systems that 
support this.

Table 18: Sfboot Parameters

Parameter

Description

Содержание SFA6902F
























































































































































































































































































































































































Отзывы:

Нет отзывов