manualshive.com logo in svg

Solarflare SFA6902F, Руководство пользователя, Страница: 62 / 375

Поделиться
Скачать
Solarflare SFA6902F Скачать руководство пользователя страница 62

Issue 11

© Solarflare Communications 2014

57

Solarflare Server Adapter

User Guide

The following parameters in 

Table 18

 are used to control the configurable parameters for the Boot 

ROM driver when running prior to the operating system booting.

 

-s, --quiet

Aliases: --silent

Suppresses all output, except errors; no user 
interaction. You should query the completion code to 
determine the outcome of commands when 
operating silently (see 

Performance Tuning on 

Windows on page 221

). 

-l --list

Lists all available Solarflare adapters. This option 
shows the ifname and MAC address. 

Note: this option may not be used in conjunction 
with the any other option. If this option is used with 
configuration parameters, those parameters will be 
silently ignored.

-i, --adapter =<ethX>

Performs the action on the identified Solarflare 
network adapter. The adapter identifier 

ethX

 can be 

the ifname or MAC address, as output by the --

list

 

option. If 

--adapter

 is not included, the action will 

apply to all installed Solarflare adapters.

-c --clear

Resets all adapter options except 

boot-image

 to 

their default values. Note that 

--clear

 can also be 

used with parameters, allowing you to reset to 
default values, and then apply the parameters 
specified.

Table 18: Sfboot Parameters

Parameter

Description

boot-

image=<all|optionrom|uefi|di

sabled>

Specifies which boot firmware images are served-up 
to the BIOS during start-up. This parameter can not 
be used if the 

--adapter

 option has been specified. 

This option is not reset if 

--clear

 is used.

Table 17: Sfboot Options

Option

Description

Содержание SFA6902F
























































































































































































































































































































































































Отзывы:

Нет отзывов