manualshive.com logo in svg

Solarflare SFA6902F, Руководство пользователя, Страница: 321 / 375

Поделиться
Скачать
Solarflare SFA6902F Скачать руководство пользователя страница 321

Issue 11

© Solarflare Communications 2014

316

Solarflare Server Adapter

User Guide

Figure 51: Virt-Manager GUI tool

To enable SR-IOV acceleration of the virtio adapter change the "SR-IOV acceleration mode" to 
"Hybrid", and the "Device model" to virtio.

Virt-manager configuration for SR-IOV: Modifying an existing adapter

It is also possible to change the "SR-IOV Acceleration mode" for existing adapters: 

Figure 52: Change SR-IOV on Existing Adapter

Verifying SR-IOV

As described above, libvirt will manage VFs for interfaces with a vf-hotplug attribute. If there are 
spare VFs available when the VM is started then one (or more) VFs will be attached into the running 
guest. If the guest OS has the Solarflare VF drivers, and the interface is a virtio interface, then the 
virtio interface will be accelerated.

NOTE: 

Red Hat Enterprise Linux 5 Update 5 and Update 6 guests require the acpiphp module to be 

loaded before PCI hotplug will work:

# echo "modprobe acpiphp" >> /etc/rc.modules

# chmod +x /etc/rc.modules

# modprobe acpiphp

Содержание SFA6902F
























































































































































































































































































































































































Отзывы:

Нет отзывов