manualshive.com logo in svg

Solarflare SFA6902F, Руководство пользователя, Страница: 199 / 375

Поделиться
Скачать
Solarflare SFA6902F Скачать руководство пользователя страница 199

Issue 11

© Solarflare Communications 2014

194

Solarflare Server Adapter

User Guide

Table 48: Sfteam Options

Option

Description

/Help or /? or /H

Displays command line syntax and provides a description 
of each sfteam option.

/Version

Shows detailed version information and exits. 

/Nologo

Hides the version and copyright message at startup. 

/Verbose

Shows extended output information for the command 
entered. 

/Quiet

Aliases: /Silent

Suppresses all output, including warnings and errors; no 
user interaction. You should query the completion code 
to determine the outcome of commands when operating 
silently. 

/Log <Filename>

Logs output to the specified file in the current folder or 
an existing folder. Specify

 /Silent

 to suppress 

simultaneous output to screen, if required.

/Computer <ComputerName>

Performs the operation on the identified remote 
computer. Administrator rights on the remote host 
computer is required. 

/List

Lists all available Solarflare adapters and any teams and 
VLANs. This options shows the adapter’s ID number, 
name and MAC address. 

/Create

Creates a team or VLAN. To be valid, this option must be 
used with the 

/Adapter

 option for each adapter that 

you want to add to the team. 

To specify a name for the team, include the

 /Name

 

option. To add VLANs to a team, include the 

/Vlan

 

option. 

Note that once a team has been created, sfteam does 
not allow you to change its adapters, VLANs or team 
name. Either delete the team and set it up again, or use 
SAM instead to configure the team. 

/Delete <team name or 

vlan group>

Deletes the identified team or group. The team identity 
can be specified as the team name or group ID. This 
option cannot be used to delete VLANs.

/Clear

Deletes all teams and VLANS. 

Содержание SFA6902F
























































































































































































































































































































































































Отзывы:

Нет отзывов