Solarflare SFA6902F Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 375

Solarflare SFA6902F Скачать руководство пользователя страница 53

Issue 11

© Solarflare Communications 2014

48

Solarflare Server Adapter

User Guide

sfc: i2c-core mii hwmon hwmon-vid i2c-algo-bit mtdcore mtdpart *

i2c-algo-bit: i2c-core

mtdpart: mtdcore

*For Red Hat Enterprise Linux from version 5.5 add

mdio

to this line.

3

A configured kickstart file with the Solarflare Driver RPM manually added to the

%Post

section. For example:

%post

/bin/mount -o ro <IP Address of Installation server>:/<path to
location directory containing Solarflare RPM> /mnt
/bin/rpm -Uvh /mnt/<filename of Solarflare RPM>
/bin/umount /mnt

3.9 Unattended Installation - SUSE Linux Enterprise Server

Unattended SUSE Linux Enterprise Server installations are configured with AutoYaST. The
documentation for AutoYaST can be found at:

http://www.suse.com/~ug/autoyast_doc/index.html

The prerequisites for a Network AutoYaST installation are:

• SUSE Linux Enterprise installation media.

• A DHCP server for IP address assignments and to launch PXE Boot.

• A NFS or FTP server to provide the installation source.

• A TFTP server for the download of the kernel boot images needed to PXE Boot.

• A boot server on the same Ethernet segment.

• An install server with the SUSE Linux Enterprise Server OS.

• An AutoYaST configuration server that defines rules and profiles.

• A configured AutoYast Profile (control file).

Further Reading

• SUSE Linux Enterprise Server remote installation:

http://www.novell.com/documentation/sles10/sles_admin/?page=/documentation/sles10/
sles_admin/data/cha_deployment_remoteinst.html

• SUSE install with PXE Boot:

http://en.opensuse.org/SuSE_install_with_PXE_boot

«
...
51
52
53
54
55
...
»

Содержание SFA6902F
























































































































































































































































































































































































Отзывы:

Нет отзывов