manualshive.com logo in svg

Solarflare SFA6902F, Руководство пользователя, Страница: 261 / 375

Поделиться
Скачать
Solarflare SFA6902F Скачать руководство пользователя страница 261

Issue 11

© Solarflare Communications 2014

256

Solarflare Server Adapter

User Guide

This will mount a virtual CD-ROM in the guest OS. If the guest OS is Windows, it can autorun the CD 
and install tools (if not, navigate to the CD-ROM device and run the setup program yourself). If the 
guest is a Linux OS, you must mount the CD, install the tools, and configure them. For example, if the 
guest is Red Hat:

# mount /dev/cdrom /mnt

# rpm –i /mnt/VMwareTools*.rpm

# vmware-tools-config.pl

VMware ESX NetQueue

Solarflare adapters supports VMware’s NetQueue technology, which accelerates network 
performance in 10 Gigabit Ethernet virtualized environments. NetQueue is enabled by default in 
VMware versions. There is usually no reason not to enable NetQueue.

NOTE: 

VMware NetQueue accelerates both receive and transmit traffic.

Содержание SFA6902F
























































































































































































































































































































































































Отзывы:

Нет отзывов