manualshive.com logo in svg

Solarflare SFA6902F, Руководство пользователя, Страница: 248 / 375

Поделиться
Скачать
Solarflare SFA6902F Скачать руководство пользователя страница 248

Issue 11

© Solarflare Communications 2014

243

Solarflare Server Adapter

User Guide

The following parameters in 

Table 61

 are used to control the options for the Boot ROM driver when 

running prior to the operating system booting.

--log <filename>

Logs output to the specified file in the current folder 
or an existing folder. Specify 

--silent

 to suppress 

simultaneous output to screen, if required.

--computer <computer_name>

Performs the operation on a specified remote 
computer. Administrator rights on the remote 
computer is required. 

--list

Lists all available Solarflare adapters. This option 
shows the ifname and MAC address. 

Note: this option may not be used in conjunction 
with the any other option. If this option is used with 
configuration parameters, those parameters will be 
silently ignored.

-i, --adapter =<vmnicX>

Performs the action on the identified Solarflare 
network adapter. The adapter identifier 

vmnicX

 can 

be the name or MAC address, as output by the --

list

 option. If 

--adapter

 is not included, the 

action will apply to all installed Solarflare adapters.

--clear

Resets all adapter options except 

boot-image

 to 

their default values. Note that 

--clear

 can also be 

used with parameters, allowing you to reset to 
default values, and then apply the parameters 
specified.

Table 61: Sfboot Parameters

Parameter

Description

boot-

image=<all|optionrom|uefi|di

sabled>

Specifies which boot firmware images are served-up 
to the BIOS during start-up. This parameter can not 
be used if the 

--adapter

 option has been specified. 

This option is not reset if 

--clear

 is used.

Table 60: Sfboot Options

Option

Description

Содержание SFA6902F
























































































































































































































































































































































































Отзывы:

Нет отзывов