manualshive.com logo in svg

Solarflare SFA6902F, Руководство пользователя, Страница: 188 / 375

Поделиться
Скачать
Solarflare SFA6902F Скачать руководство пользователя страница 188

Issue 11

© Solarflare Communications 2014

183

Solarflare Server Adapter

User Guide

pfiov=<enabled|disabled>

Enable switching of traffic between any PFs. When 
disabled traffic is switched only between a PF and 
related VFs.

pf-count=<pf count>

Specify the (per port) number of available PCIe 
physical functions in the range 1-8. Default value is 1. 

The setting is applied to all ports on an adapter and 
MAC address assignments may change follows 
changes with this setting. 

port-mode=<Default|10G|40G>

Configure the port mode. This is for SFN714xQ 
adapters only. MAC address assignments may change 
follows changes with this setting. It may be necessary 
to change the number of physical functions after 
changing the port mode.

Default is 40G.

msix-

limit=<8|16|32|64|128|128|25

6|512|1024>

Specifies the maximum number of MSI-X interrupts 
the specified adapter will use. The default is 32.

Note: Using the incorrect setting can impact the 
performance of the adapter. Contact Solarflare 
technical support before changing this setting.

sriov=<enabled|disabled>

Enable SR-IOV support for the operating systems that 
support it.

SR-IOV is not supported by Solarflare adapters on 
Windows Hyper-V servers.

vf-count=<vf count>

The number of virtual functions advertised to the 
operating system. The Solarflare SFC9000 series 
device has a limit of 1024 interrupts. Depending on 
the value of msix-limit and vf-msix-limit, some of 
these virtual functions my not be usable.

vf-msix-limit=<1|2|4|8>

Maximum number of MSI-X interrupts a virtual 
function may use.

firmware-variant=<full-

featured | ultra-low-latency 

| capture-packed-stream | 

auto>

Identify the firmware variant to use on SFN7000 
series adapters only. The default is auto.

insecure-

filters=<enabled|disabled>

If enabled, bypass filter security on non-privileged 
functions. This is required for some applications, but 
reduces security in virtualized environments.

Table 46: Sfboot Parameters

Parameter

Description

Содержание SFA6902F
























































































































































































































































































































































































Отзывы:

Нет отзывов