manualshive.com logo in svg

Solarflare SFA6902F, Руководство пользователя, Страница: 307 / 375

Поделиться
Скачать
Solarflare SFA6902F Скачать руководство пользователя страница 307

Issue 11

© Solarflare Communications 2014

302

Solarflare Server Adapter

User Guide

tx_65_to_127_pkts

Number of packets transmitted where the length is 
between 65 and 127 bytes.

tx_brdcst_pkts

Number of broadcast packets transmitted.

tx_def_pkts

The number of packets successfully transmitted after the 
network adapter defers transmission at least once when 
the medium is busy.

tx_errors

Number of packets transmitted with incorrect FCS.

tx_ex_col_pkts

Number of packets not transmitted due to excessive 
collisions. Excessive collisions occur on a network under 
heavy load or when too many devices contend for the 
collision domain. After 15 retransmission at the 
original transmission attempt the counter is incremented 
and the packet is discarded.

tx_ex_def_pkts

Number of packets for which transmission is deferred for 
an excessive period of time.

tx_ge_15xx_pkts

Number of packets transmitted where length is between 
15xx and 9000 bytes. 1518(non VLAN), 1522(VLAN).

tx_late_col_pkts

A sending device may detect a collision as it attempts to 
transmit a frame or before it completes sending the entire 
frame. If a collision is detected after the device has com-
pleted sending the entire frame, the device will assume 
that the collision occurred because of a different frame. 
Late collisions can occur if the length of the network seg-
ment is greater than the standard allowed length.

Collision occurred beyond the collision window (512 bit 
times).

This should always be zero as Solarflare adapters operate 
in full duplex mode.

tx_le_64_pkts

Number of frames transmitted where the length is less 
than 64 bytes.

tx_mult_col_pkts

Number of packets transmitted after being subject to 
multiple collisions.

tx_multicst_pkts

Number of multicast packets transmitted. Includes flow 
control packets.

tx_octets

Number of octets transmitted.

tx_pause_pkts

Number of pause packets transmitted.

Table 75: Name sfxge_mac

Parameter

Description

Содержание SFA6902F
























































































































































































































































































































































































Отзывы:

Нет отзывов