manualshive.com logo in svg

Solarflare SFA6902F, Руководство пользователя, Страница: 18 / 375

Поделиться
Скачать
Solarflare SFA6902F Скачать руководство пользователя страница 18

Issue 11

© Solarflare Communications 2014

13

Solarflare Server Adapter

User Guide

1.5 Open Source Licenses

1.4.1 Solarflare Boot Manager

The Solarflare Boot Manager is installed in the adapter's flash memory. This program is free 
software; you can redistribute it and/or modify it under the terms of the GNU General Public License 
as published by the Free Software Foundation; either version 2 of the License, or (at your option) 
any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without 
even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 
GNU General Public License for more details.

The latest source code for the Solarflare Boot Manager can be download from 

https://

support.solarflare.com/

. If you require an earlier version of the source code, please e-mail 

[email protected].

1.4.2 Controller Firmware

The firmware running on the SFC9xxx controller includes a modified version of libcoroutine. This 
software is free software published under a BSD license reproduced below:

Copyright (c) 2002, 2003 Steve Dekorte

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted 
provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the 
following disclaimer.

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and 
the following disclaimer in the documentation and/or other materials provided with the 
distribution.

Neither the name of the author nor the names of other contributors may be used to endorse or 
promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY 
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY 
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Содержание SFA6902F
























































































































































































































































































































































































Отзывы:

Нет отзывов