- 27 -
- 27 -
6.3.1.2 SMALL SEEDS (F position)
Follow the steps below for sowing with
SMALL SEEDS
:
Fig. 6.20
F
N
Fig. 6.19
3
2
4
1
Fig. 6.21
8
9
10
1-
Remove the locking ring (3, Fig. 6.19) as shown in the ima-
ge.
2-
Place the bolt (2, Fig. 6.19) in the shaft fitting groove, as
shown in the image
3-
Turn the spindle (4, Fig. 6.19) for regulating the dose.
4-
Fix the spindle position placing the locking ring (3, Fig.
6.19).
5-
Place the turbine air regulator in
F position
(Fig. 6.20).
6-
Pull the gear (8, Fig. 6.21) until releasing it from the gear (9,
Fig. 6.21) and fit it to the gear (10, Fig. 6.21).
THE MICRO-DOSAGE SYSTEM ALLOWS BETTER
DISTRIBUTING SMALL AND NORMAL SIZED
SEEDS IN REDUCED AMOUNTS.
READ THE ADVISABLE VALUE FOR SMALL SEEDS
WITH THE F MICRO-DOSAGE SYSTEM IN THE
DOSAGE CHARTS (SEE SECTION 10).
CHECK THE CLEANING BRUSH CONDITIONS BE-
FORE START SOWING SMALL SEEDS.
DO NOT EXCEED THE 25 MEASURE IN THE REG-
ULATION SCALE FOR MICRO-DOSING SMALL
SEEDS (1, Fig. 6.19).
OPEN THE SEED DISPENSER INLET (Fig. 6.22).
Fig. 6.22
A
