Sola A-6000 SM Скачать руководство пользователя страница 14

Страница: 14 / 64

- 14 -

5.2

COUPLING AND ADAPTING THE PTO

SHAFT

Once the seed driller is coupled to the tractor, the TRANS-

MISSION MUST BE ADAPTED for the equipment with me-

chanical turbine. In order to do so, it is necessary to:

Dismantle and introduce one end in the PTO and the other

end in the seed driller. Therefore, introduce the PTO shaft

into the threaded shaft in both machines, maintaining the

security plug pressed, release the plug and move the PTO

shaft back until hearing a click sound; this sound means

that the plug is in its corresponding receptacle.

ASSEMBLY HOMOKINETIC PTO SHAFT INTO

THE TRACTOR PTO.

ALWAYS HANDLE THE TRANSMISSION WITH

THE ENGINE OFF. ALWAYS WORK WITH THE

TRANSMISSION PROTECTED AND IN GOOD

CONDITIONS. AVOID ANY ROTATION IN THE

TRANSMISSION PROTECTION TUBE BY FIXING

IT WITH THE CHAIN.

Determine the minimum shift length “L” (Fig. 5.3), By lif-

ting and lowering the hydraulic lift.

Fig. 5.3

Cut the plastic and metal surplus parts with the same size

and reassembly the transmission (Fig. 5.4).

Fig. 5.4

Fig. 5.5

Activate the seed driller lift

and verify that the trans-

mission shift is correct.

Secure the PTO shaft to the

tractor by means of the fi-

xing chain (Fig. 5.5).

PREVENT THE TRANSMISSION FROM WORKING

IN A VERY STEEP INCLINATION ANGLE (MAX.

35º).

COUPLE THE TRACTOR PTO SMOOTHLY SUD-

DEN ACCELERATION CAN RESULT IN SERIOUS

DAMAGE TO THE SEED DRILLER.

Содержание A-6000 SM

































































Результаты поиска

Содержание A-6000 SM

Отзывы:

Похожие инструкции для A-6000 SM

Бренды по названию

Популярные бренды

Sola A-6000 SM, Руководство пользователя

Результаты поиска

Содержание A-6000 SM

Отзывы:

Похожие инструкции для A-6000 SM

Бренды по названию

Популярные бренды