8
DIRIS Digiware - 542875G - SOCOMEC
EN
2.3. Responsibility
• Assembly, connection and use must be carried out in accordance with the installation standards currently in force.
• The device must be installed in accordance with the rules given in this manual.
• Failure to observe the rules for installing this unit may compromise the device's intrinsic protection.
• The device must be placed in a system which itself complies with the applicable standards and safety regulations of
the country of installation.
• Any cable which needs to be replaced may only be replaced with a cable having the correct rating.
• Despite constantly striving for quality in preparing this manual, errors or omissions are always a possibility and are not
the responsibility of SOCOMEC.
3. PRELIMINARY OPERATIONS
To ensure the safety of personnel and the device, please carefully read the contents of these instructions before
installation.
Check the following points as soon as you receive the package containing the device, one or several sensors:
• The packaging is in good condition
• The device has not been damaged during transit
• The device part number match your order
•
The packaging includes the device fitted with removable terminal blocks and a Quick Start Guide.
4. PREREQUISITES
Before commissioning your DIRIS Digiware system, make sure all equipment operate under the latest firmware versions.
The latest firmware versions are available on the Socomec website.
The firmware upgrade is done using the Product Upgrade Tool software, by connecting a laptop to the Micro USB port of
your DIRIS Digiware equipment.
For DIRIS Digiware M-50/M-70 and D-50/D-70, firmware upgrade can also be done remotely directly from their
embedded webserver.
