78
DIRIS Digiware - 542875G - SOCOMEC
EN
Analogue inputs - DIRIS Digiware IO-20
Number of inputs
2
Type / Power supply
0/4-20mA, 200 Ω max - SELV
Accuracy
0.5% full scale
Function
Connection of analogue sensors (pressure, humidity, temperature...)
with linear or quadratic interpolation
Connection
Removable screw terminal block, 2x2 positions, stranded or solid
0.14 - 1.5 mm² cable. Use Copper Conductors Only.
16.1.4. Communication characteristics
Digiware BUS
Function
Connection between DIRIS Digiware modules
Cable type
Specific SOCOMEC cable with RJ45 connections
RS485
Connection type
2 - 3 half duplex wires
Protocol
Modbus RTU
Baudrate
9600 to 500 000 bauds
Function
Configuration and reading of centralised data on the DIRIS Digiware
U and all of the DIRIS Digiware I linked by the Digiware bus
Location
Single-point on DIRIS Digiware C-31
Connection
Removable screw terminal block, 3 positions, stranded or solid
0.14 - 1.5 mm² cable. Use Copper Conductors Only.
USB
Protocol
Modbus RTU over USB
Function
Firmware upgrade and configuration of DIRIS Digiware U / S / I / IO
modules
Location
On each DIRIS Digiware U / S / I / IO module
Connection
Type B micro USB connector
