Snorkel SR5719, Руководство оператора и по техническому обслуживанию

Страница: 41 / 160

41
Snorkel International, LLC
2009 Roseport Road
Elwood, KS 66024
www.snorkellifts.com
Model: Snorkel SR5719
Part Number: 159-0074-000
Version: Stage 5 / Open Cab
2.18.1 FUEL QUALITY (DIESEL)
It is advisable to use only Diesel fuels normally available on the market with a
sulphur content less than 0.5%. If the sulphur content is higher, the intervals
between engine oil changes must be reduced. For more information see the
engine manual.
2.19 STORING THE MACHINE
If the machine remains idle and unused for long periods of time, no particular measures are necessary. It
may be wise to disconnect the power battery. The machine should be stored in a dry, closed environment.
In order for the electrical equipment to function correctly, the machine must be stored at a temperature
between -20°C and +50°C. It can only be stored at +70°C for short periods, without exceeding 24 hours.
If it is stored in a dusty environment, it is recommended to:
o
Disconnect the supply batteries
o
Cover the machine with a sheet
Before using the machine, after an extended period of storage, hook back up any disconnected circuits and
check the lubrication of the mechanical components.
2.20 MACHINE DEMOLITION
The machine was built with steel, aluminium and plastic components: thus most of the
material is effectively recyclable.
When the machine is decommissioned, its composing materials should be sorted for subsequent reuse or
differentiated disposal. None of the materials used to build the machine are particularly toxic or hazardous
to operator health.
The lubricating fluids, engine oil, fuel residue and hydraulic oil must be disposed of appropriately (in
compliance with laws in force) and not dispersed into the environment.
At the end of its service life the machine must be dismantled by competent personnel trained in the correct
handling methods - and if necessary, the disassembly - of the machine.
Only use equipment and vehicles suitable for lifting, which comply with standards and legal regulations in
force.
2.21 USING THE MACHINE
We provide a list of various information and rules that should be acknowledged and followed in order to
work in total safety for yourselves and others. Several general rules of conduct and limits of machine use
are reported in section 2 of the manual.