30
Snorkel International, LLC
2009 Roseport Road
Elwood, KS 66024
Model: Snorkel SR5719
Part Number: 159-0074-000
Version: Stage 5 / Open Cab
2.10.3
TILTING THE SEAT
By pushing the lever (G) all the way, the backrest can be moved
forward to access the rear compartment where all the accompanying
accessories are housed, the machine handbook and various installed
devices. The side armrests can be tilted freely.
The windscreen washer water tank (H) is found on the left side of the
seat (with a level indicator).
Attention! The seat is fitted with a sensor that is activated when the
operator sits and enables the engine to start.
2.10.4
SAFETY BELTS
A properly fastened seat belt offers valid protection in case of an
accident. The risk of injury is reduced and the possibility of survival
is increased.
Before fastening the seatbelt, the driver’s seat must be properly
adjusted. Holding the tab, pull the belt to slightly above the pelvis.
Insert the tab (1) into the buckle (2) of the seat until you hear a
click. Try pulling the seatbelt to check that it’s properly inserted in
the buckle.
To adjust the seatbelt, pull the flap of the left belt with your left
hand to increase its adherence to the body. If the belt is too tight,
release it, lengthen the left part as much as necessary and repeat the fastening operation.
To release the seatbelt, press the red button (3), which will cause the tab to be expelled.
The seatbelt is properly regulated when it fits snugly against the
pelvis without causing any particular discomfort during driving
operations. Use of the seatbelt increases the sense and level of safety
of the operator, reducing the risk of accidents. The driver’s cab has
been designed to support the weight of the machine in case of
toppling (ROPS); seatbelts must nonetheless always be properly
fastened to avoid being thrown out and/or being crushed if the cab
rolls over.
Содержание SR5719
Страница 159: ......
