Snorkel SR5719, Руководство оператора и по техническому обслуживанию

Страница: 84 / 160

84
Snorkel International, LLC
2009 Roseport Road
Elwood, KS 66024
www.snorkellifts.com
Model: Snorkel SR5719
Part Number: 159-0074-000
Version: Stage 5 / Open Cab
The telescopic boom is equipped with an AUX hydraulic line with proportional control, used to control a
hydraulic function of the accessories.
The quick
couplings are the “push - pull” type. Do not perform tap connection and
disconnection operations when the circuit is pressurised: risk of high-pressure oil leaking.
Perform these operations without operating the joystick control. When the pressure taps
are not used, they must be plugged with their rubber protections. Do not work with the
accessory unlocked.
e. STACKING
i. HOW TO DRAW A LOAD
Approach the load from a perpendicular direction, with the boom retracted and the forks horizontal. If the
forks are not equipped with the transversal travel system (optional), operate the parking brake, get down
from the machine and move the forks so that they are centered with respect to the load and with respect
to the machine.
Attention! Risk of crushing fingers while moving the forks. Pay attention.
Slowly move the machine forward, slightly lifting the forks. Fully penetrate the load with
the forks until the machine is rested against the load. Raise the boom slightly and tilt the
forks back (transport position): the angle of the forks must be sufficient to stabilise the load preventing it
from moving forward in the event of sudden braking during transport.