Snorkel SR5719, Руководство оператора и по техническому обслуживанию

Страница: 34 / 160

34
Snorkel International, LLC
2009 Roseport Road
Elwood, KS 66024
www.snorkellifts.com
Model: Snorkel SR5719
Part Number: 159-0074-000
Version: Stage 5 / Open Cab
2.12 LOAD DIAGRAM
The load diagram shown is purely indicative as each machine will have it’s own type, specific to
each model. The effective machine diagram is shown in the quick guide found inside the cab and in
the dedicated appendix annexed to the manual.
The load diagram consists of a grid defined by a horizontal axis which indicates the length of the boom
extension (unit of measurement expressed in metres or feet) and a vertical axis which shows the lifting
height reached by the kinematics of the machine (unit of measurement expressed in metres or feet).
The grid is crossed by a number of inclined lines (with an angle range from 0° to 70°) which represents the
angle of inclination with respect to the horizontal plane reached by the lifted boom.
A number of letters appear at the line of maximum inclination reached by the boom (70°), which
correspond to the letters visible from the driver's seat on the side wall of the boom extension and these
represent the "extension", that is the measurement of the extensions.
The curved lines that start from the letters and end on the horizontal axis of the load diagram allow the
dimensions expressed by the letter to be converted into metres or feet of the length reached by the
telescopic boom.
The intersection of the minimum and maximum inclination lines of the boom with the curves
corresponding to the minimum and maximum boom extension, delimit the machine work area.
This work area is divided into a number of coloured sectors, each of which represents a different lifting
capacity expressed in kilograms or pounds.