Smiths Medical CADD Solis 2100 Скачать руководство пользователя страница 4

Страница: 4 / 40

Introduction

This Technical Manual is applicable only to the model 2100/2110 CADD

-Solis ambulatory infusion pump.

It is intended to provide a basic but limited understanding of the mechanical and electrical operation of

the CADD

-Solis ambulatory infusion pump to people familiar with the device. It also outlines cleaning

and functional testing procedures that can be performed on the pump. The CADD

-Solis Operator’s

Manual and Administrator Settings Guide should be used in conjunction with this manual for complete

information.

IMPORTANT NOTICE:

CADD

-Solis ambulatory infusion pump operations and safety features are based on a microcomputer

design. Inadequate servicing or tampering with the safety features of the pump may seriously affect

performance and safety. For that reason, ALL SERVICING AND REPAIR OF THE CADD

-SOLIS

AMBULATORY INFUSION PUMP MUST BE PERFORMED BY SMITHS MEDICAL OR ITS

AUTHORIZED AGENTS.
The manufacturer’s warranty agreement shall become null and void if the pump is not used in accordance

with the Operator’s Manual and Instructions for Use provided with the pump accessories; or if the pump

is serviced by anyone other than Smiths Medical or those authorized by Smiths Medical.

Limited Warranty

The limited warranty associated with the CADD

-Solis ambulatory infusion pump can be found in the

product literature supplied with the product when originally purchased, which is incorporated herein by

reference. SMITHS MEDICAL SPECIFICALLY DISCLAIMS ANY OTHER WARRANTY, WHETHER

EXPRESS, IMPLIED OR STATUTORY, INCLUDING, WITHOUT LIMITATION ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR USE. Smiths Medical further disclaims

responsibility for the suitability of the system for a particular medical treatment or for any medical

complications resulting from the use of the system.
The manufacturer shall not be responsible for any incidental damages or consequential damages to

property, loss of profits, or loss of use caused by any defect or malfunction of the system.
If you wish to receive additional information about the extent of the warranty on these products,

please contact your Smiths Medical representative or call Customer Service at 1 800.258.5361 (USA) or

+1 214.618.0218.
All recommendations, information, and literature supplied by Smiths Medical with respect to the

CADD

product line are believed to be accurate and reliable, but do not constitute warranties. No agent,

representative, or employee of Smiths Medical has authority to bind Smiths Medical to any representation

or warranty, expressed or implied.

Contraindications

•

The pump is not to be used for delivery of blood or cellular blood products, as blood and cellular blood

products will be damaged by the pumping mechanism.

•

This pump is not to be used in any intra-articular space infusion.

Warnings

• The user should ensure that the performance offered by the pump is fit for the intended use and that the

pump is not used in any way or for any purpose other than its intended use.

• If the pump is dropped or hit, inspect it for damage. Do not use a pump that is damaged or not

functioning properly. Contact Smiths Medical Customer Service to return a pump for service.

• Do not use rechargeable NiCd or nickel metal hydride (NiMH) batteries. Do not use carbon zinc

(“heavy duty”) batteries. They do not provide sufficient power for the pump to operate properly.

• Always check the battery compartment for fluid or debris before inserting the batteries, and do not allow

any fluid or debris to fall into the battery compartment. Fluid or debris in the battery compartment may

damage the battery contacts, and could result in loss of power and nondelivery of drug.

Содержание CADD Solis 2100









































Результаты поиска

Содержание CADD Solis 2100

Отзывы:

Похожие инструкции для CADD Solis 2100

Бренды по названию

Популярные бренды

Smiths Medical CADD Solis 2100, Техническое руководство

Результаты поиска

Содержание CADD Solis 2100

Отзывы:

Похожие инструкции для CADD Solis 2100

Бренды по названию

Популярные бренды