Smiths detection HI-SCAN 100100T, Руководство пользователя

Страница: 17 / 222

How to ensure safety
A
Warning!
When working near running conveyor belts or rotating rollers, do not wear loose scarves or identity
card or key lanyards put around your neck or ties , or, if so, only use those provided with a safety
breakaway buckle ! Do not wear your hair hanging loose ! If you are charged with loading and unload-
ing roller or modular plastic belt conveyors , wear clothes that fit tightly ! 170
R
Warning!
Ensure that no person puts a hand into the inspection tunnel while the X-ray unit is activated! Switch
off the X-ray unit by means of the key switch and withdraw the key before you manually clear bag-
gage or freight items that have got stuck or before you correct other malfunctions in the inspection
tunnel or on the conveyors! If the unit does not have a key switch, wait until all indicators on the key-
board have extinguished and separate the unit from the mains by
pulling the mains plug ! 180
A
Warning!
Control the conveyors so that nobody risks to be injured by falling baggage or freight items and no
baggage or freight item is damaged! 200
A
Warning!
If you notice an electrical defect at the X-ray unit, e.g. through smoke or unusual heat build-up,
switch off the unit at once and disconnect it from the mains by unplugging the mains plug! If the unit
is equipped with a UPS unit ( U ninterruptible P ower S upply unit), switch it off as well (
F
1-31 "How to
switch on") or ensure it is switched off! Make sure the unit remains turned off (e.g. by removing the
mains cable (
F
1-28 "How to connect the X-ray unit to the mains") or the key) until it has been
checked by a competent service technician! 210
S
Attention!
Keep away open containers with liquids or any other non-solid materials as well as dirty or wet ob-
jects from all parts of the X-ray unit and from the feed and discharge conveyors! Closed containers
with liquids or non-solid materials as well as
dirty and rain-wet baggage or freight items may only
be scanned after having been put into appropriate plastic containers (see below)! 220
95587412 01/01/09 © Smiths Heimann
I
In case of proper use, the HI-SCAN X-ray
unit
is film safe , i.e. even highly sensit-
ive film material (1600 ASA) is not af-
fected after repeated exposures during
several inspection cycles. Food,
audio-/video tapes, magnetic data carri-
ers and semiconductor memories
(EPROMs) are not affected.
1-7
S
Attention!
Stop the conveyors before baggage or
freight items pile up inside the inspec-
tion tunnel or at the end of the convey-
ors!
190