Smiths detection HI-SCAN 100100T, Руководство пользователя

Страница: 158 / 222

How to set the scanning functions

Activate the menu item. The menu
opposite is displayed.

Use the navigator to select the im-
age displays and to activate or de-
activate the conveyor stop.

Exit the menu with
r
.
Operating mode*
In the menu item Operating mode you can choose between
One-way and Automatic return . In the One-way mode the
object to be scanned is conveyed through the tunnel and
scanned and runs out from the tunnel exit. In the
auto-
matic return* mode on the other hand the object is re-
turned automatically in front of the tunnel entrance after
scanning.

You can select the required function with the navigator.

You exit the menu with
r
.
The conveyor keys
Units equipped with newer software* allow to configure
the conveyor control keys (
m
and
n
) in such a way
that a key has to be either pressed briefly (locking: on) to
start the conveyor, or kept depressed (locking: off) during
the conveyor run.
The settings Forward/Reverse key locking: off can be chosen to avoid unattended operation of the conveyors,
and, if the unit is not equipped with a contact mat* or an attendance detector*. With setting a time between 1
and 3 seconds you can still allow the operators to shortly release the keys without stopping the conveyors at
once (immediate conveyor stop is nevertheless possible with
1
).
95587413 01/01/09 © Smiths Heimann
A
Warning!
If an image section is mag-
nified with the zoom func-
tion
during the conveyors
are running , dangerous
objects which are located
in the non-visible image
sections might be
missed !
1530
I
The Automatic return setting is expedi-
ent if the tunnel exit of the unit is not ac-
cessible or accessible only with difficulty
because of space conditions.
The
disadvantage of automatic return is
that inspections of several items take
much more time.
I
If the function Continuous scanning (see
below) is set, the control keys are auto-
matically set to
locking: off for reasons
of safety.
2-36