-13-
No.PS
※※
-OMW0005-A
Mounting and Installation
■
Installation
○Mounting by panel mount adapter
●
Fix the panel mount adapter to the Controller with the set screws M3 x 8L (2 pcs.) as attached.
•Panel mount adapter (Model: ZS-26-B)
Panel mount a Front protective cover (Model: ZS-26-01)
□48 conversion adapter (Model: ZS-26-D)
: The panel mount adapter can be rotated by 90 degrees for mounting.
: Front panel of this Controller meets IP65 (if
□48 conversion adapter is used, it meets IP40). However, if the panel mount adapter
is hold enough with screw and the instrument is not seated correctly, water might enter. Screw shall be tightened 1/4 to 1/2 turns
more after touched correctly.
○Panel cutout dimension
: Panel thickness 0.5 to 8 mm