Calendar Search
Figure 121 — Calendar Search screen.
Days with recorded video display on the calendar with white numbers. You can highlight the days with
recorded video by using the arrow buttons. Once you have highlighted a day, press the button to select it.
A time bar displays at the bottom of the calendar. Hours in which video was recorded will be highlighted
with blue. You can use the
Up
and
Down
arrow buttons to highlight the time bar. Once the time bar is
highlighted, you can select the time by using the
Left
and
Right
arrow buttons.
NOTE: The time bar is in one-hour segments. If a segment is highlighted, it means that some
video was recorded during that hour. However, it does NOT mean video was recorded for the
entire hour.
If the DVR’s time and date have been reset to a time that is earlier than some recorded video, it is possible
for the DVR to have more than one video stream in the same time range. Move to
Select a Segment
,
and select the video stream you want to search. Refer to the
Appendix D – Time Overlap
for further
information on searching time-overlapped video streams.
NOTE: The lower number of the Segment indicates the latest recorded video.
Once you have set the date and time you want to search, highlight
GO
and press the button. The
selected date and time will display. The
(Play/Pause),
(Rewind),
(Fast Forward), Jog and
Shuttle can now be used to review the surrounding video.
NOTE: It is possible that no recorded image displays on the current screen. Press the
(Display)
button and change the screen mode to 4x4. You will be able to easily see the camera have recorded
video during target time.
