To add a Group, highlight the
+ Group…
box and press the
button. A virtual keyboard appears allowing you to enter the
Group name. You can use up to 15 characters including spaces
in the group name. Enter the name and assign authority levels
to the group.
Highlighting the
Authority
box and pressing the button will
toggle between all authority levels being turned On and Off.
Highlighting the individual authority level boxes and pressing
the button will toggle between that authority level being
turned On and Off. The authority levels that can be turned On
and Off are:
Figure 39 — New Group setup screen.
y
Shutdown
— The user can shut the system down on a local system.
y
Upgrade
— The user can upgrade the software on a local system or a PC running RAS.
y
System Time Change
— The user can change the system date and time on a local system or a PC running
RAS.
y
Data Clear
— The user can clear all video data or format disks on a local system or a PC running RAS.
y
Setup
— The user without Setup authority cannot establish any system settings excluding system shutdown
and logout on a local system or a PC running RAS.
y
Color Control
— The user can control brightness, contrast, hue and saturation for cameras on a local
system or a PC running RAS.
y
PTZ Control
— The user can control the PTZ camera on a local system or a PC running RAS.
y
Alarm-Out Control
— The user can reset the DVR’s outputs including the internal buzzer during an alarm
by pressing the
(Alarm) button on a local system or alarm-out control button on a PC running RAS.
y
Covert Camera View
— The user can view video from cameras set as Covert while in the Live Monitoring
or Search mode on a local system or a PC running RAS.
y
System Check
— The user can view the remote system status or check the remote system status as a batch
process on a PC running RAS.
y
Record Setup
— The user can establish all Record settings on a local system or a PC running RAS.
y
Search
— The user can access the Search mode on a local system or a PC running RAS.
y
Clip-Copy
— The user can copy video clips on a local system or a PC running RAS, and save video data in
an AVI, bitmap or JPEG file format.
To add a User, highlight the
+ User…
box and press the
button. A virtual keyboard appears allowing you to enter the
User Name. Enter the name and assign the User to a Group and
password. You can use camera buttons 1 to 9 on either the front
panel or remote control to assign the password. The password
can be up to 8 digits. You will be asked to confirm the password.
Figure 40 — New User setup screen.
NOTE: In addition to using the front panel buttons or the infrared remote control, you can use the
virtual keyboard to assign the password. To display the virtual keyboard click the
…
button using
the mouse (not supplied).