NOTE: A user who does not have
Covert Camera View
authority cannot view video from cameras
set to
Covert 1
or
Covert 2
in both the live monitoring and playback modes.
Highlight the
PTZ
tab, and the PTZ setup screen displays.
Figure 56 — Camera PTZ setup screen.
NOTE: You will only be able to set up PTZ devices if the PTZ port is set to RS232 or RS485.
Highlight the box in the
Product
column for the PTZ camera you wish to
configure and press the button. A list of PTZ devices appears. Select
your camera from the list and press the button. You will need to
connect the camera to the RS232 or RS485 connector on the back of the
DVR following the camera manufacturer’s instructions.
Figure 57 — PTZ Device list.
You can assign IDs to each camera by highlighting the box under the
ID
heading and pressing the
button. Change the number by highlighting it and using the
Up
and
Down
arrow buttons to increase and
decrease the number. The PTZ ID number can be set from 0 to 256.
Highlight the
Setup…
box and press the button. The Port Setup window appears.
Configure the port’s setting based on the PTZ camera manufacturer’s
instructions.
Figure 58 — Port Setup screen.
You can save your Camera changes by highlighting
Save
and pressing the button. Selecting
Cancel
exits the screen without saving the changes.
