Schedule Screen
Highlight
Schedule
in the Record menu and press the button, and the Schedule setup screen appears.
Figure 69 — Schedule setup screen.
You can program the DVR to record only during certain times based on time, day of the week, and
holidays. The smallest time segment you can use is 30 minutes.
Highlighting
Schedule On
and pressing the button toggles between On and Off. In the Schedule On
mode, the DVR records video based on the schedule established in the Schedule screen. When turning
Schedule recording Off, you will be asked to confirm your decision, and displays at the top-left corner
of each camera screen. Panic recording will function even when Schedule is turned off. displays on
the screen and
displays on the status display panel during panic recording.
Highlight the
+
and press the button to add a schedule item.
Highlight the box under the
Day
heading and press the button to change the days that the scheduled
recording will take place. Choose from:
Sun
,
Mon
,
Tue
,
Wed
,
Thu
,
Fri
,
Sat
,
M~F
,
Hol
and
All
.
Highlight the box under the
Range
heading and press the button to change the time range that the
scheduled recording will take place. The smallest time segment you can use is 30 minutes.
Highlight the box under the
Mode
heading and press the button to change the recording mode that will
be used. Choose from:
No Record
,
Time
,
Event
and
Time & Event
.
When the DVR is in the
No Record
mode, it will not record during the preset day and time range as long
as the
(Panic) button is not pressed. Use the
No Record
mode when you do NOT want the DVR to
record during certain times.
When the DVR is in the
Time
mode, the icon displays at the top-left corner of the screen. The DVR
will record and displays the icon at the top-left corner of the screen during the scheduled times.
When the DVR is in the
Event
mode, the red icon displays at the top-left corner of the screen. The
DVR will record and displays the icon at the top-left corner of the screen when any event occurs.
When the DVR is in the
Pre-Event
recoding mode, the yellow icon displays when there is no event,
and the DVR is not recording. When the DVR is in the
Pre-Event
mode, the red and display when
any event occurs and the DVR starts recoding.