Object Detection Screen
Highlight
Object Detection
in the Event menu and press the button. The
Object Detection
setup
screen appears.
Figure 86 — Object Detection Settings screen.
Object detection can be turned On or Off for each camera.
Highlighting the box under the
Sensitivity
heading and pressing the button allows you to adjust the
DVR’s sensitivity to object detection. There are five settings with
1
being the least sensitive and
5
being
the most sensitive.
You can define the area of the image where you want to detect object. Highlight the box under the
Zone
heading, and press the button. The
Object Detection Zone
screen displays.
Figure 87 — Object Detection Zone screen.
The
Object Detection Zone
screen is laid over the video
for the selected camera. You can set up object detection
zones by selecting or clearing blocks.
NOTE: You can set up object zones one block at a
time in groups of 10 individual block groups. A block
group is positioned within the image area using the
Up and Down arrow buttons, and individual blocks
within the block groups are selected or cleared using
the camera buttons.
Press the button to display the menu screen. The menu on the setup screen has the following functions: