Remote Control Screen
Highlight
Remote Control
in the Devices menu and press the button. The
Remote Control
setup
screen allows you to select a port and make correct settings for a remote keyboard.
Figure 65 — Remote Control setup screen.
Highlight the box beside
Port
and select from None, RS232 1, RS232 2, RS485 1 and RS485 2. If the
RS232 port and RS485 port are in use for PTZ control, networking or text input, the remote keyboard
cannot be configured.
Highlight
Setup…
and select the correct Baud Rate, Parity, Data Bits and Stop Bits for the device you
are connecting to the DVR.
Highlight the box beside
Remote Control Product
and select the device from the list.
You can save your Remote Control settings by highlighting
Save
and pressing the button. Selecting
Cancel
exits the screen without saving the changes.
Recording Settings
Your DVR offers a variety of flexible recording modes. You can set it up to record all the time or to only
record events. It can be set up to continue recording once the hard disk drive is full by recording over the
oldest video, or you can set it up to alert you when the hard disk is full and stop recording.
Figure 66 — Record menu.
