Smartbitt SBOL50KTIII-3, Руководство по обслуживанию

Страница: 30 / 57

30
Model
Type
JS6
JS5 JS4
Pin1&pin2 Pin3&pin4 Pin5&pin6 Pin7&pin8
30K
0 0 1 0 0 0
30KL
0 0 1 0 1 0
60K
0 1 0 0 0 1
60KL
0 1 0 0 1 1
100KL 1 0 0 0 1 1
120KL
0 1 0 0 1 1
180KL
0 1 0 0 1 1
200KL
0 0 1 0 1 1
Note
：
“1” indicates that the jumper is connected;
“0”indicates that nothing is connected,
For long run model, The 30KL’s charge board on the INV board
（
71-304125-XXG
）。
The 30KL’s
default charging current is 4A for battery configuration.
For standard mode, The 30K’s charge board on the INV board
（
71-304125-XXG
）。
The 30K’s
default charging current is 2A for battery configuration.
For long run model, charger’s part number is 71-303981-03G-XXG (“xx” means the version of
charger) normally, the 60KL’s default charging current is 8A for battery configuration, and the
100KL/120KL’s default charging current is 16A for battery configuration,and the 180KL/200KL’s
default charging current is 24A for battery configuration.
8.2.3 Regulation of the system
Parameter Setting Method:
1. Connect the RS232 port of the UPS to the RS232 port of the computer with RS232 cable. Choose
the “Start>>Program>>Accessory>>Communication>>Hyper terminal” and start Hyper terminal
application. Set the COM port for “COM1” and the other setting as Figure 7.1.
Communication protocol setting Display setting
Figure 7.1 Hyper terminal setting