Smartbitt SBOL50KTIII-3, Руководство по обслуживанию

Страница: 50 / 57

50
Noted1: if the UPS return “D006 NAK …”, it is means your setting is not successful.
Noted2: if you have set the parameter successful, you also need to turn off the input mains and
let UPS into standby mode with battery until UPS Shutdown automatic, don’t turn off the
battery before the UPS Shutdown, because the UPS is saving your new parameter to the
system.
11.3 Start 10K/15K/20K(L) /30K(L)/40K(L)/60K(L)/80K(L) unit safely with standard LCD
Before starting any operation, please disconnect battery input, no matter for standard or long run
model due to its potential electricity risk.
Figure 8.3.1 Figure 8.3.2
Step1: Connect the DC Source output to the battery connect(figure 8.3.3), Start the DC
Source (figure 8.3.2)
Step2: Press “ON” Button to start the UPS, then the UPS will enter into the standby mode
(figure8.3.4).