SMART Embedded Computing COMX-CORE-2610-ET, Инструкция по установке и эксплуатации

Страница: 33 / 92

COMX-CORE-2610-ET Installation and Use (6806800P11E) 33
Chapter 2
Hardware Preparation and Installation
2.1 Environmental and Power Requirements
You must make sure that following environmental requirements meet when board is
operated in your system configuration.
2.1.1 Environmental Requirements
The following table provides the environmental requirement details for the board.
2.1.2 Power Requirements
This board is designed to operate with the input voltages and currents as defined in the fol-
lowing tables.
NOTICE
Operating temperatures refer to the temperature of air circulation around the board,
but not the component temperature.
Table 2-1 Environmental Requirements for Module with CORE i7 2610UE
Environmental Factor Operating Non-operating
Temperature -20°C to 70°C -40°C to 85°C
Humidity 10% to 90% Non-condensing 5% to 95% Non-condensing
Vibration
0.01g ^2/Hz at 5-500 Hz
Random Vibration
Shock 20 G peak (half sine) 11 ms
Altitude -60m to 4000m ASL
Table 2-2 Module with CORE i7 2610UE Power Requirement (with 2x2 GB non-ECC
memory)
State +12V 5VSB VCC_RTC
Total power
consumption
G3 (AC off) 0 0 5uA 0.015mW
Idle (CMOS Setup) 1.11A 0.042A 0 13.53W