SMART Embedded Computing COMX-CORE-2610-ET Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 92

background image

COMX-CORE-2610-ET Installation and Use (6806800P11E)

17

Safety Notes

This section provides warnings that precede potentially dangerous procedures throughout
this manual. Instructions contained in the warnings must be followed during all phases of
operation, service, and repair of this equipment. You should also employ all other safety
precautions necessary for the operation of the equipment in your operating environment.
Failure to comply with these precautions or with specific warnings elsewhere in this manual
could result in personal injury or damage to the equipment.

SMART EC intends to provide all necessary information to install and handle the product in
this manual. Because of the complexity of this product and its various uses, we do not
guarantee that the given information is complete. If you need additional information, ask
your SMART EC representative.

The product has been designed to meet the standard industrial safety requirements. It must
only be used in its specific area of office telecommunication industry, industrial control, and
development. It must not be used in safety critical components, life supporting devices or
on aircraft.

Only personnel trained by SMART EC or persons qualified in electronics or electrical
engineering are authorized to install, remove or maintain the product. The information given
in this manual is meant to complete the knowledge of a specialist and must not be used as
replacement for qualified personnel.

Keep away from live circuits inside the equipment. Operating personnel must not remove
equipment covers. Only factory authorized service personnel or other qualified service
personnel is allowed to remove equipment covers for internal subassembly or component
replacement or any internal adjustment.

Do not install substitute parts or perform any unauthorized modification of the equipment or
the warranty may be voided. Contact your local SMART EC representative for service and
repair to make sure that all safety features are maintained.

SMART EC and our suppliers take significant steps to make sure that there are no bent pins
on the backplane or connector damage to the boards prior to leaving the factory. Bent pins
caused by improper installation or by inserting boards with damaged connectors could void
the SMART EC warranty for the backplane or boards.

This product operates with dangerous voltages that can cause injury or death. Use extreme
caution when handling, testing, and adjusting this equipment and its components.

«
...
15
16
17
18
19
...
»

Содержание COMX-CORE-2610-ET





























































































Отзывы:

Нет отзывов

Похожие инструкции для COMX-CORE-2610-ET

Бренд: Seco Страницы: 14

Бренд: Advantech Страницы: 5

Бренд: ZiLOG Страницы: 19

Бренд: Quanmax Страницы: 63

Бренд: Lanner electronics Страницы: 79

CompactPCI CPV5370-700-01

Бренд: Solution Systems Страницы: 114

Бренд: SOYO Страницы: 47

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды