SMART Embedded Computing COMX-CORE-2610-ET, Инструкция по установке и эксплуатации

Страница: 11 / 92

COMX-CORE-2610-ET Installation and Use (6806800P11E) 11
About this Manual
Overview of Contents
This manual is divided into following chapters and appendix.
About this Manual , lists all conventions and abbreviations used in this manual and outlines
the revision history.
Safety Notes on page 17 , describes the safety information which has to be regarded.
Sicherheitshinweise on page 21 , provides the German translation of the safety notes
section.
Chapter 1, Introduction on page 25 , provides an overview of the product's features.
Chapter 2, Hardware Preparation and Installation on page 33 , provides instructions for
installing and removing the module.
Chapter 4, Functional Description on page 53 describes the functions of the various
components on the board.
Chapter 3, Controls, LEDs, and Connectors on page 39 , provides information's on the pin
assignments on the various connectors on the board
Chapter 5, BIOS on page 65 , describes the boot process and the setup utility used to
configure the product.
Appendix A, Related Documentation on page 89 , list all related documents.
Abbreviations
These are the abbreviations used in this manual.
Abbreviations Definitions
A Amps.
AC '97 Audio CODEC (Coder-Decoder).
ACPI
Advanced Configuration Power Interface - software standard to
implement power saving modes in PC-AT systems.
Basic Module COM Express™ 125mm x 95mm module form factor.
Carrier Board
An application specific circuit board that accepts a COM Express™
module.
EEPROM Electrically Erasable Programmable Read-Only Memory.
GPI General Purpose Input.