SMART Embedded Computing COMX-CORE-2610-ET, Инструкция по установке и эксплуатации

Страница: 18 / 92

18 COMX-CORE-2610-ET Installation and Use (6806800P11E)
Safety Notes
System Installation
Damage of Circuits
Electrostatic discharge and incorrect installation and removal of the product can damage
circuits or shorten its life.
Before touching the product make sure that you are working in an ESD-safe environment
or wearing an ESD wrist strap or ESD shoes. Hold the product by its edges and do not
touch any components or circuits.
Pin Diagram
Forcing the module into the system may damage connector pins.
If the module hangs during insertion, pull it out and insert it again.
Damage of the Product and Additional Devices and Modules
Incorrect installation or removal of additional devices or modules damages the product or
the additional devices or modules.
Before installing or removing additional devices or modules, read the respective
documentation and use appropriate tools.
Operation
System Damage
During the course of handling, shipping, and assembly, pins, mounting screws, fans and
other items can become loose or damaged.
Do not operate a damaged shelf, this can cause damage to devices that interact with it.
System Overheating - Cooling Vents
Improper cooling can lead to blade and system damage and can void the manufacturer’s
warranty.
To ensure proper cooling and undisturbed airflow through the system always operate the
system in a horizontal position. Do not obstruct the ventilation openings at the top, sides
and back of the system. Keep the fresh air intake at the bottom-front side of the chassis
completely clear. Make sure that the fresh air supply is not mixed with hot exhaust from
other devices. Make sure that all slots are populated with either blades, filler blades, or
dummy blades.