SMA STORAGE-67-TS-10, Инструкция по установке и эксплуатации

Страница: 20 / 52

20 INSTALLATION
© SMA Solar Technology AG Subject to changes to the technical content! Version 1.1 Last updated 04/2021
6.2 Optional: Lifting the top of the cabinet
The cabinet’s top cover can be raised by about two centimeters to improve the ventilation and heat dissipation
of the STORAGE-67-TS-10.
1
Optional – lift the cabinet’s top cover for additional ventila-
tion: First, remove all crane lifting eyes
1 .1
and then the crane brack-
ets
1 .2
. Place the plastic washers
11 .2
you have removed aside for
later use.
2
Remove the two locking screws (8 mm) of the cable bushing panel in
the left-hand half of the cabinet at the marked points.
3 Screw a spacer
11 .3
in the threaded hole at each of the four corners of
both cabinet halves to fix the crane lifting eyes
1 .1
and the crane
bracket
1 .2
. The tightening torque must not exceed 50 Nm. Then,
place the cabinet’s top cover on the spacers
11 .3
.
4
Secure the cabinet covers using the M12 x 25 mm screws
11 .1
and
plastic washers
11 .2
provided as well as the ones previously removed
in step 1 .