SMA STORAGE-67-TS-10, Инструкция по установке и эксплуатации

Страница: 16 / 52

16 BATTERy STORAGE SySTEM STORAGE-67-TS-10
© SMA Solar Technology AG Subject to changes to the technical content! Version 1.1 Last updated 04/2021
5.3 Connections and layout of the SMA HV APU
NO. DESIGNATION DESCRIPTION
1 BATTERy - DC connection of the battery for the negative pole (black)
2 B DC connection of the battery for the positive pole (red)
3 24 V AUX PWR Not used in this system
4
E-STOP Two-pin plug for the optional connection of a potential-free emergency off switch (pre-fitted with bridge on
delivery)
5 TERM CAN bus termination
TERM must be activated (ON) for the first and last CAN bus nodes.
6 CAN IN SMA HV APU Master/slave communication (input)
7 CAN OUT SMA HV APU Master/slave communication (output)
8
CAN SMA Not used in this system
9 LAN Modbus TCP/IP transmission for communication between battery and Inverter Manager
10 ADDRESS Further information can be found in the section “LAN2 wiring for systems with multiple master and slave
storage systems“ on page 39.
11 BAT COM Communication connection to the first battery module
12 C DC connection of the STPS 60-10 or BatBreaker for the positive pole (red)
13
CHARGER - DC connection of the STPS 60-10 or BatBreaker for the negative pole (black)
14 GROUND Ground connection (M6 thread bolt on the rear of the unit)
15 DISPLAy Display
16 MARkING Marking for activating and changing the display by tapping
17
SWITCH On/off switch for the battery
18 APU Fuse (F1) Fuse element to protect the SMA HV APU (2 A time-delay fuse (T) 5 x 20 mm, in accordance with DIN 41571-
2 type 521.020 from ESKA, 250 V
AC
). System cannot be operated with a defective fuse.
5.4 Connections and layout of the battery module
DESIGNATION DESCRIPTION
19 – POLE Negative pole on battery (black)
20 + POLE Positive pole on battery (red)
21 RACk BALANCING IN Rack balancing (input)
22
RACk BALANCING OUT Rack balancing (output)
23 BAT COM OUT Communication connection for
battery module (output)
24
BAT COM IN Communication connection for
battery module (input)
BATTERY CHARGER
18 17
15
16
1 2 10 11 12 13
14
6 8 5 3
7 9 4
19
21
22
24 23
20