Align the right wing fillet base to the right wing and fuselage
as shown. Glue in place to match on contour of the wing.
Cut part way through the first scribed line on the fillet base.
Bend the fillet up so it meets the fuselage and glue in place.
Glue WF1 thru WF5 to the fillet base and fuselage along the
scribed lines
Align WF7 with the trailing edge of the wing and the tip of the
fillet base. You will need to wet it down with ammonia/water
in order to fit the curve. Glue in place and trim even with the
fillet base.
