Trim all stringers even with F18.
Sand the edges of the F24 pieces as shown. This will make it
easier for sheeting. Soak the F24 pieces with thin CA to
strengthen them when sheeting.
Create fuselage sheeting by taking a 1/16" x 4" x 36" and
splitting it in two to create 1/16" x 2" x 36” pieces
Edge glue the piece you just cut to a 1/16" x 4" x 36" sheet.
This will create sheeting for one side. Repeat to make a sec-
ond sheeting for the other side.
**Electric Only**
Glue 1/16" scrap balsa sheeting to a 1/16"
x 4" x 36" balsa sheet as shown to create sheeting.
