Skye MiniMet, Руководство по установке, Страница: 10 / 58

The bottom tube is the largest diameter and does not exceed 50 mm.
The top tube is the smallest in diameter and does not exceed 38 mm.
The wall thickness of the tube is not less than 2 mm.
3.6.1 Parts List for Mast :-
1 x BASE PLATE
4 x SMALL BASE PLATE PEGS
5 x MAST SECTIONS
4 x LOCKING COLLARS
4 sets x GUYLINES
3 guys per set fitted to a guyline ring, 3mm diameter galvanised steel wire
rope (min. breaking load 0.538 tonnes), with adjustable straining screws
12 x LARGE GUYLINE PEGS
1 x TEMPORARY GUYLINE SET (3 ropes and 3 small pegs)
The mast baseplate should be held in place by the small pegs if used on soft ground or
bolted in place if used on a concrete base.
The large guyline pegs are intended for use in soft ground. If the guylines are to be
anchored to a concrete base then a suitable ring or eyebolt should be fixed to the concrete
instead (please see Appendix 14)
Straining screws are attached to the lower end of the guylines. These can be hooked onto
the large guyline pegs, or it can be hooked to the ring or eyebolt if used on a concrete
base.
3.6.2 10 metre mast schematic
7
MiniMet Installation