59
SKOPE TME-N ActiveCore
Troubleshooting
Service Manual
On-site work procedure (continued)
Fit bullet (line
piercing) valves
to low and high
side of system.
Create a safe work area around faulty
unit. Area must be in open well
ventilated space. Ensure no hazards,
ignition sources or drains.
Fit HC gauge set.
Safely release gas
(do NOT release
gas into water).
After gas is
released, remove
gauges and fit
caps to valves.
Ensure valves not
leaking.
Send faulty unit for repair. The unit
must be transported in a suitably
ventilated vehicle, and must be stored
in a well ventilated place.
Label unit with
suspected fault.
Degas faulty unit
and return to
service depot:
Can gas be
released safely?
No
Yes
Transport unit in
gas safe vehicle
to safe area for
gas release.
