30
Replacement Procedures
Service Manual
SKOPE TME-N ActiveCore
7
Replacement Procedures
Lighting
The cooler is fitted with LED modular interior lights, and TME-AC models are
also fitted with an LED modular sign light. Ensure the light is replaced with
the same light type. Fluorescent or LED tubes cannot be used in place of
LED modular lights.
Refer to the table below for replacement light specifications.
Light specifications
The lighting is made up of three components which are replaceable:
LED modular light
Light power supply (1 per cabinet)
Interior wiring loom (1 per door)
Power is supplied to the lights by the power supply (located in the cabinet
electrics panel above the door/s) via the wiring loom/s which run down the
sidelight channel.
Lighting components are all non serviceable items. If a component is faulty,
it should be removed and a SKOPE OEM new replacement component
fitted.
Refer to the diagnostics table below to determine what component may be
at fault, and the procedures over the next few pages for component
replacement instructions.
Ensure the cabinet is isolated from the power supply before cleaning or
removing parts.
IMPORTANT
Replace the light with the same SKOPE OEM part.
DO NOT use alternative LED strip or tube lights, or fluorescent
tubes.
Model
Interior light
Sign light
Description
Part No.
Description
Part No.
TME650N-A
Interior light
ELL11771
n.a.
n.a.
TME650N-AC
Sign light
ELL11772
TME1000N-A
n.a.
n.a.
TME1000N-AC
Sign light
ELL11773
